Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Gung C., Ballarino A., Ding K., Lu K., Niu E., Fernandez A.V.
Ключевые слова: ITER, current leads, design, design parameters, fabrication, prototype, HTS, Bi2223, tapes, stacked blocks, LTS, NbTi, strands, test results
Bauer P., Wang J., Li G., Zhou T., Song Y., Huang X., Clayton N., Fang L., Wang C., Liu C., Liu C., Gung C., Ding K., Lu K., Niu E., Rol, Dai Z., Gong Z., Piccin
Ключевые слова: ITER, current leads, design, fabrication, insulation, discharge characteristics, high voltage process, measurement setup, test results
Ключевые слова: cyclotron, magnetic field distribution, angular dependence, LTS, NbTi, coils, geometry effects, design, numerical analysis
Bi Y., Li J., Chen Y., Song Y., Li L., Zhang H., Hu R., Ding K., Feng H., Du S., Zou C., Feng C., Lian H., Gen C.
Ключевые слова: medical applications, cyclotron, design parameters, coils, LTS, NbTi, fabrication, magnetic systems, quench protection, test results, coils insert, coils outer
Ding K., Zhou T., Lu K., Du Q., li B., Yu S., Huang X., Liu C., Zhang K., Jing K., Ran Q., Han Q., Li J., Xu L., Song Y., Zbigniew P., Kurt S.
Ключевые слова: ITER, central coils, magnets, current leads, HTS, Bi2223/Ag alloy, tapes, fabrication, test results
Ключевые слова: ITER, coils poloidal field, current leads, prototype, test results, HTS, Bi2223/Ag alloy, tapes
Mitchell N., Kim H., Ilyin Y., Chen L., Chen Y., Devred A., Clayton N., Gung C., Ding K., Lu K., Beemsterboer C., Farek J., Wen X., Man S., Naoyuki S.
Ключевые слова: bus bar conductor, ITER, joints, design, test results, feeder, heat loads, pressure drop
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Huang X., Liu C., Ding K., Lu K., Feng H., Niu E., Du Q., Vergara A., Zhu S*1., Fernandez-Hernando L.
Ключевые слова: ITER, correction coils, current leads, HTS, Bi2223, prototype, fabrication, joint resistances, overheating, pulsed current, test results
Ключевые слова: measurement setup, cryogenic systems, test results, ITER, current leads, HTS, control systems, new, facility
Lee S., Yang Y., Bauer P., Taylor T., Zhou T., Devred A., Song Y., Liu C., Ding K., Lu K., Niu E., Ran Q.
Ключевые слова: HTS, Bi2223, tapes, current leads, ITER, fabrication, test results, prototype, LTS, NbTi, cable-in-conduit conductor, joints, solder, heat exchanger
Ключевые слова: HTS, Bi2223/Ag alloy, tapes, stacked blocks, joints, current leads, design, design parameters, fabrication, heat exchanger, insulation, hybrid systems, magnets, temperature distribution
Ключевые слова: ITER, current leads, prototype, fabrication, design, design parameters, pressure drop, HTS, Bi2223, stacked blocks, LTS, NbTi, cable-in-conduit conductor, joint resistances, insulation, solder, heat exchanger
Ключевые слова: ITER, current leads, HTS, design, design parameters, heat exchanger, termination, LTS, fatigue behavior, welding, joint resistances
Mitchell N., Chen Y., Devred A., Song Y., Huang X., Clayton N., Liu C., Gung C., Cheng Y., Ding K., Lu K., Shen G., Feng H., Yu X., Sato N., Niu E., Pierre B.
Ключевые слова: ITER, feeder, China, review, status, HTS, current leads, joints, thermal properties, shields
Ключевые слова: HTS, current leads, Bi2223/Ag alloy, high field magnets, hybrid systems, fabrication, test results
Ключевые слова: HTS, current leads, test results, Bi2223, design, critical caracteristics, substrate Ni-V
Ключевые слова: HTS, current leads, Bi2223/Ag alloy, tapes, design, design parameters, overcurrent, accelerator magnets, experimental results, high field magnets
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.